POLIDOR MAX – CUT POLISHER

POLIDOR MAX is a powerful, high-performance cutting polisher that removes sandpaper marks from 1500 to 2000 grit. It removes orange peel, contamination, runs and small imperfections. Water-based and silicone-free.

PACKAGING: 500ml and 3.6Kg

BENEFITS:

High cutting power

Water-based

How to Use

Product ready for use.

Shake the product.
Check that the surface to be applied is clean and dry.
Use an electric or pneumatic polisher with a Protelim Aggressive Double-Sided Beret.
Apply small amounts of the product and spread it over areas of approximately 50x50cm under the bonnet.
Spread the product with a beret.
Operate the equipment between 1,800rpm and 2,200rpm, with medium pressure on the workpiece in slow, short movements.
Use Protelim Microfiber Flannel or absorbent cotton, if necessary, to remove and clean any impurities under the surface.
If necessary, repeat the application on the area to be polished.

IMPORTANT:

Do not apply this polish in sunlight or when the surface is heated.
Use personal protective equipment (PPE).

Product ready for use.

Shake the product.
Check that the surface to be applied is clean and dry.
Use an electric or pneumatic polisher with a Protelim Aggressive Double-Sided Beret.
Apply small amounts of the product and spread it over areas of approximately 50x50cm under the bonnet.
Spread the product with a beret.
Operate the equipment between 1,800rpm and 2,200rpm, with medium pressure on the workpiece in slow, short movements.
Use Protelim Microfiber Flannel or absorbent cotton, if necessary, to remove and clean any impurities under the surface.
If necessary, repeat the application on the area to be polished.

IMPORTANT: